Once the software packages are installed, connect your hardware as follows:

1. Connect the 12V external power supply to the AVR ONE! and to your AC socket

2. Connect the USB cable between the AVR ONE! and the host computer

3. Power up the AVR ONE!, and ensure that the USB driver is automatically installed

4. Connect and power up the EVK1100 or equivalent target application board

5. Connect the MICTOR-38 connector of the AVR ONE! probe to the corresponding socket on the EVK.

Note: If the EVK you are using does not have a MICTOR-38 socket mounted, one is provided with the AVR ONE! kit. Remember to solder the ground connections on the underside of the board! If you choose to use the 10-pin JTAG connector, you aill be able to debug the application, but streaming or buffer trace will not be possible!